Dinan has a long and storied past when it comes to engine tuning having introduced our first engine performance chip in the mid 80's - over 3 decades ago. From those early years with chips, followed by engine software and then to our own external control modules we have become experts in nearly every possible way to extract safe, reliable power from the factory powerplant. While we have long preferred the unheard of control and sophistication capable of being achieved from engine software, over the past 6 years that option was not one afforded to us. That changes now with the re-introduction to flash tuning for Dinan with the S55 engine. The first of the next generation of Dinan flash tunes, the S55 calibrations are held to the same principles of the past; performance, reliability, and safety. Dinan performance engine software is so much more than just turning up the turbo boost after all. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. Protecting your BMW while giving the most performance is the definition of "Performance Without Sacrifice". Drivetrain and engine components are analyzed for strength then the calibration is tested on the dyno and in the real world for durability and drivability. This next generation of Dinan flash tunes does differ from the past however in that there are many different options to choose from depending on your needs or desires. Whether you want a warranted tune for 93 pump gas when under the factory warranty, an E85 performance tune for maximum performance when outside of the factory warranty or something in between, chances are Dinan has an option for you. Maximum performance with a warranty; the Dinan +HE Performance engine software is designed for the S55 engine coupled with the Dinan heat exchanger (D780-0001A) and yields more power, improved drivability while also removing of the factory speed governor for maximum enjoyment. Dinan + variants of engine software also carry the infamous Dinan 4yr / 50k, factory matching warranty that the brand is synonymous with.
Features:
- More Power: Max gains of 80 HP / 88 lb-ft of torque over stock on the F87 M2C and 68 HP / 80 lb-ft of torque over stock on the F8x M3/M4. Consult the performance charts for detailed data
- Factory matching warranty coverage (4year / 50,000 mi), including the possibility of consequential damages
- Calibrated to work exclusively with pump gas (91 and 93 octane)
- Requires the Dinan heat exchanger (D780-0001A) to retain warranty coverage and to realize advertised power gains
- Full map rescaling for drivability from idle to wide open throttle and everywhere in between
- Top speed governor removed
- Upgradeable from DINANTRONICS - See the Purchase Guide or FAQ linked below for details
- Retains all BMW factory engine damage safeguards
- Torque gains drastically improve acceleration
- No hesitation between shifts
- Downloads through the OBD2 Port - See compatability notice at the bottom of the product page
- Hassle free operation — Install and enjoy
Brand |
Dinan |
Dinan Point Value |
3 |
Emission Code |
4 |
Factory Rated HP |
405 - 425 (441-480 Measured) |
Factory Rated Torque (lb-ft) |
406 (441 Measured) |
Labor Time (Hours) |
0.5 |
Max HP Gain |
90 @ 5500 RPM (M2C); 75 @ 4500 RPM (M3/M4) |
Max Torque (lb-ft) Gain |
97 @ 4500 RPM (M2C); 88 @ 4500 RPM (M3/M4) |
Peak HP |
514 @ 6500 RPM (M2C); 514 @ 6500 RPM (M3/M4) |
Peak HP Gain |
62 @ 7000 RPM (M2C); 23 @ 7000 RPM (M3/M4) |
Peak Torque (lb-ft) |
522 @ 4500 RPM (M2C); 522 @ 4500 RPM (M3/M4) |
Peak Torque (lb-ft) Gain |
49 @ 3000 RPM (M2C); 78 @ 4000 RPM (M3/M4) |
Product Type |
Engine Software |
Required Items |
Dinan Heat Exchanger (D780-0001A). |
Warranty |
Dinan Factory Matching (4yr/50k) Warranty |
Part Number |
D900-S55-S1-W-HE |